![DIY Recycled Water Bottle Crown](https://www.handmadecharlotte.com/wp-content/uploads/2013/10/recycled-party-crown.jpg)
These DIY recycled water bottle crowns are perfect for a little (or big!) girl’s party. They’re super simple to put together and make a great party activity as well. All you need is a plastic bottle and some rhinestones.
![DIY Bejeweled Crown](https://www.handmadecharlotte.com/wp-content/uploads/2013/10/Crown-2.jpg)
![you-will-need](https://www.handmadecharlotte.com/wp-content/uploads/2013/10/you-will-need.jpg)
What You Need
- Rhinestones
- Glue
- Scissors
- Ribbon
- Plastic bottle
![Crown-3](https://www.handmadecharlotte.com/wp-content/uploads/2013/10/Crown-3.jpg)
Step 1
Cut the top and bottom off your plastic bottle. You will be left with a cylinder shape. The height of mine is about 6 inch.
Step 2
Cut triangles out of the cylinder to make a crown shape.
Step 3
Put little dots of glue on the back of the rhinestone and attach them to the crown. If you use too much glue, they will slide down.
Step 4
Punch a hole in either side of the crown. You can heat up the tip of a pointy knife with a lighter and punch a hole into the plastic like that.
![Crown-5](https://www.handmadecharlotte.com/wp-content/uploads/2013/10/Crown-5.jpg)
Step 5
Thread a ribbon through these holes and tie a knot so they stay secure.
![DIY Bejeweled Crown](https://www.handmadecharlotte.com/wp-content/uploads/2013/10/Crown-6.jpg)
Now it’s time to party like a princess!